VANTAGEaudio information sheet, SME Series IV and Series V tonearm installation

VANTAGEaudio information sheet | SME Series IV and V Tonearms

Following information is for the SME Series IV and Series V tonearms

More INFORMATION sheets | Return to HOME page

Dimensions:

Nominal length, pivot-stylus 9.179"

Distance from pivot to turntable center 8.478"

Offset angle 23.635 deg

Linear offset 3.679"

Tracking adjustment 0.7"

Height above mounting surface min 2.22"
max 3.46"

Height of record surface above mounting surface min 1.039"
max 2.279"

Depth below mounting surface 2.234"

Radial clearance for balance weight 2.874"

Clearance between cabinet lid and record surface assuming cartridge height at 0.669" 1.377"

SME V

E&OE ~ This information is provided as a guide and no determination as to the accuracy of the information is given here. If in doubt or you have any questions please ask or refer to the OEM if applicable

Dimensions:

Nominal length, pivot-stylus	9.179"
Distance from pivot to turntable center	8.478"
Offset angle	23.635 deg
Linear offset	3.679"
Tracking adjustment	0.7"
Height above mounting surface	min 2.22" max 3.46"
Height of record surface above mounting surface	min 1.039" max 2.279"
Depth below mounting surface	2.234"
Radial clearance for balance weight	2.874"
Clearance between cabinet lid and record surface assuming cartridge height at 0.669"	1.377"
	SME V
E&OE ~ This information is provided as a guide and no determination as to the accuracy of the information is given here. If in doubt or you have any questions please ask or refer to the OEM if applicable