Dimensions:
Nominal length, pivot-stylus	9.103" (231.21 mm)
Height above mounting surface	3.125" (79.37 mm) max
Height above mounting surface	2.375" (60.33 mm) min
Depth required below mounting surface	1.875" (47.63 mm)
Clearance for std balance weights	2.00" (50.80 mm)
Tracking adjustment	+/- ½" (+/- 12.70 mm)
Clearance required between turntable surface and cabinet lid	1.75" (44.45 mm)
Distance from center of turntable spindle to arm pivot center	8.48" (215.40 mm)
The arm is normally installed so that the center line of the bedplate is radial with the turntable. If this is not possible, the bedplate may be turned to another position provided the requirements for correct alignment are met
E&OE ~ This information is provided as a guide and no determination as to the accuracy of the information is given here. If in doubt or you have any questions please ask or refer to the OEM if applicable