|
View Images Below
Motor and Turntable:
Drive System - Quartz Pll Direct Drive
Motor - Coreless and slotless DC servo motor
Platter - 13 inch diameter (330mm) aluminum alloy diecast laminated with Duralumin with stainless turntable sheet
Speeds - 33-1/3 and 45 rpm
Wow and flutter - less than 0.02% (WRMS)
Rumble - better than -94dB DIN weighted
Load fluctuation - 0% (within 120g of tracking force0
Transient Load fluctuation - less than 0.00015% (at 33-1/3 rpm, 400Hz, 20g.cm load)
Transient Load fluctuation - less than 0.00008% (at 33-1/3 rpm, 1000Hz, 20g.cm load)
Tonearm: Type - Static balance type, J-shaped pipe arm, EIA connector
Effective length - 9-5/8 inch (245mm)
Overhang - 9/16 inch (15mm)
Tracking error - +2 deg 26 minutes at 150mm; -1 deg 11 minutes at 85mm; +1 deg 48 minutes at 50mm
Usable cartridge weight - 1 to 9 grams or 9 to 22 grams with supplied weight
Adjustable height range - Within 1/4 inch (7mm) by helicoid fixture (0.1mm steps)
Arm base - Collet chuck type, weight 3.3lbs (1.5Kg)
Headshell - Compression molded carbon and boron fiber, weight 12g
Miscellaneous: Turntable Dimensions - 21-7/8 x 6-5/8 x 18-1/2 inches (W x H x D)
Control Unit Dimensions - 5-1/8 x 4-11/32 x 14 inches (W x H x D)
Turntable Weight - 68.2lbs (31Kg)
Control Unit Weight - 9-1/2lbs (4.3Kg)
   
 
Return to HOME page
All trademarks and rights belong to the OEM and are reproduced here for information purposes only
|